国产精品视频二区不卡,中文字幕无线在线视频观看,亚洲av久播在线观看,手机看片av永久免费

国产精品视频二区不卡,中文字幕无线在线视频观看,亚洲av久播在线观看,手机看片av永久免费    关于我们    产品展示    行业动态和资料    联系和留言    中文版 |
 

国产精品视频二区不卡,中文字幕无线在线视频观看,亚洲av久播在线观看,手机看片av永久免费

产品系列
仪器租赁RENT
仪器设备维修维护
光波光纤通信测试
电磁兼容EMC EMI测试 覆盖场强测试
交换传输电信数据测试
无线/射频测试仪器
视频/音频和电视测试
以太网网线和协议测试
材料和元器件测试
通用仪器测试
探头与附件
其他仪器仪表/设备
本公司仪器现货清单
直读光谱仪/元素分析仪
 
产品搜索

    1. <form id='fdbQ8'></form>
      1. <bdo id='PdCsZ'><sup id='qfF4R'><div id='LOzVv'><bdo id='uLuRg'></bdo></div></sup></bdo>
        1.  
          您现在的位置:国产精品视频二区不卡,中文字幕无线在线视频观看,亚洲av久播在线观看,手机看片av永久免费 > 通用仪器测试 > 数字示波器/数字信号分析 > DSO80804B DSO80404B DSA80404B 1169A E2675A DSA91304ADigital Oscilloscope
           

          产品名称:agilent DSO80804B 4 Ch 8 GHz/40GSa/是 Digital Oscilloscope及 DSA80404B DSO80404B  DSA91304A  13G  1169A N5426A

          DSO80804B中文资料.pdf 
           现货出租和出售:agilent  DSO80804B /001/ 003 /004,和 DSA80404B,配套相关软件和夹具,业内唯一的一致性测试架构,支

          持 SAS, FC, DDR, FBD, USB,SATA, Ethernet, PCI-Express, DVI,和 HDMI

          OPTION  001   2-M (2 channels), 1-M (4 channels) memory upgrade ,64 M (2 channels at 4 GSa/s) or 32 M (4 channels ≤ 2 GSa/s) 存储深度升级。

          OPTION  003   High-speed serial data analysis/mask testing with clock recovery and

          8b/10b decoding (installed at the factory) 带时钟恢复的8b/10b解码的高速串行数据分析/模版测试功能。
          OPTION  004   EZJIT Plus jitter analysis software (installed at the factory)  EZJIT Plus 抖动分析软件。




          DSA80404B 选件配置实物照片如下:



           Description:

          The DSO80804B, when combined with the InfiniiMax probing solution, offers several key signal integrity advantages including a low noise floor, low jitter measurement floor, low trigger jitter, flat combined frequency response of scope and probe and more. These foundational capabilities are crucial for achieving accurate and repeatable measurements. These signal integrity capabilities
          come from Agilent's RF design experience, proprietary packaging technologies and unique CMOS ADC architecture. Superior signal integrity maximizes engineer's design margins by not wasting any measurement accuracy due to the poor noise, jitter or frequency response of the scope or probing system. 
            Specifications:

          4 Channel
          Analog bandwidth (-3 dB): 8 GHz
          Real-time bandwidth on 2 channels and 40 GSa/s: 8 GHz
          Equivalent-time bandwidth on 4 channels with 1.56 ps point spacing: 8 GHz
          Real-time bandwidth on 4 channels at 20 GSa/s: 8 GHz
          Maximum real-time sample rate: 40 GSa/s (2 channels simultaneously), 20 GSa/s (4 channels simultaneously)
          Standard acquisition memory: 0.5 Mpts on 2 channels, 0.25 Mpts on 4 channels
          Optional acquisition memory: 2 Mpts on 2 channels, 1 Mpts on 4 channels (This option also enables: 64 Mpts on 2 channels at 4 GSa/s, 32 Mpts on 4 channels <= 2 GSa/s)
          Maximum memory in equivalent-time modes: Always 0.25 Mpts per channel
          Rise time/fall time: 10 - 90% - 54 ps; 20 - 80% - 38 ps
          Large (8.4-inch) XGA (1024 x 768) high-resolution color display
          Built-in CD-R drive on rear panel
          Windows XP Pro operating system
          I/O Ports:
          LAN: RJ-45 connector, supports 10Base-T and 100Base-T
          GPIB: IEEE 488.2, fully programmable
          RS-232 (serial): COM1, printer and pointing device support
          Parallel: Centronics printer port
          PS/2: Two ports. Supports PS/2 pointing and input devices
          USB 2.0 high speed: One port on front panel plus four ports on rear panel. All USB 2.0 high speed compatible.
          Video output: 15 pin VGA, full color output of scope waveform display
          Dual-monitor video output: 15 pin XGA, full color output of scope waveform display or dual monitor video output
          Auxiliary output: DC (+/- 2.4 V); square wave (~715 Hz and 456 MHz); trigger output (255 mV p-p into 50 Ohm)
          Trigger output: 5 V 50 Ohm back-terminated
          Time base reference output: 10 MHz filtered sine wave with all harmonics <= 40dBc. Amplitude into 50 ohm: 800 mVp-p to 1.26 Vp-p (4 dBm +/- 2 dB) if derived from internal reference. Tracks external reference input amplitude +/-1 dB if applied and selected.
          Time base reference input: Must be 10 MHz, input Zo = 50 Ohm. Minimum 360 mV p-p (-5 dBm), maximum 2.0 V p-p (+10 dBm).

          安捷伦科技公司的 Infiniium 80000B系列和InfiniiMax II探头系统将提高测量精度,增加设计裕量。安捷伦的Infiniium 80000B 系列示波器和InfiniiMax探测系统的信号完整性优势包括:业界最低的本底噪声、最低的抖动测量本底、最低的触发抖动、最平坦的示波器和探头组合频率响应曲线等。卓越的信号完整性,可消除因为示波器或探头系统的噪声、抖动或频率响应曲线不佳而导致的测量精度方面的误差,从而最大限度地提高工程师的设计裕量。

          详细介绍

          8-GHz带宽,可升级到13 GHz

          • 4个模拟通道 
          • 高达40 GSa/s的采样速率 
          • 标配512 kpts存储器,可选2 Mpts存储器(4 GSa/s采样率时为64 Mpts) 可选的2 Mpts存储器 
          • XGA显示屏,256个亮度级 

          业界领先的信号完整性

          • 本底噪声:5 mV/div时为294 uV 
          • 触发抖动< 500 fs(rms) 
          • 极低的硬件垂直灵敏度:5 mV/div 
          • 业界唯一的减噪选件(选件005) 

          极丰富的应用解决方案

          • 完整的抖动分析套件 完整的抖动分析 
          • 完整的定制套件,包括用户定义的功能、到MatLab®的链接 完整的定制包 
          • 用于PCI Express、HDMI1.3、串行ATA 3Gbps等多种串行标准的一致性解决方案 一致性解决方案 
          • 通过矢量信号分析软件进行频域分析 矢量信号分析 

          InfiniiMax探测解决方案(1.5 GHz至12 GHz)

          • 业界最低的本底噪声探测系统 
          • InfiniiMax II探测系统提供极高的信号保真度 InfiniiMax II探测系统 
          • 互换探头 

          1169A 12 GHz InfiniiMax II 系列探头放大器

          主要特性与技术指标

          Bandwidth:

          • 12 GHz specified
          • 13 GHz typical

          Range:

          • Dynamic Range: 3.3 V peak-to-peak
          • DC Offset Range: +/- 16V
          • Maximum Voltage: +/- 30V

          Input Impedance:

          • Differential Input R: 50 kOhm
          • Differential Input C: 0.21 pF
          • Single Ended Input R: 25 kOhm
          • Single Ended Input C: 0.35 pF

          Connectivity:

          • NEW 
          • NEW 

          描述

          InfiniiMax II series 1169A 12 GHz probing system designed to be used with DSO91204A and DSO91304A Infiniium oscilloscopes provides real-time bandwidth to 12 GHz specified and has 13 GHz typical performance. The innovative InfiniiMax probing system supports even the most demanding mechanical access requirements without sacrificing performance.

          Features

          • Bandwidth: 12 GHz specified, 13 GHz typical
          • Dynamic Range: 3.3 V peak to peak
          • DC Offset Range: ± 16 V
          • Maximum Voltage: ± 30V
          • Differential Input R: 50 k ohm. Differential Input C: 0.21 pF.
          • Single Ended Input R: 25 k ohm. Single Ended Input C: 0.35 pF.

          Additional Recommended Items

           

           



           

          该产品被点击数:6326   录入时间:2021/10/6   【打印此页】  【返回】  【上一页】  【下一页】 
          Copyright © 属于 广州普真仪科技有限公司 版权所有